Need help?Do you have a question about the JBL 1214 and is the answer not in the manual?
Confirms product compliance with EMC/LV directives and harmonised standards.
Covers reproduction restrictions, trademark usage, and liability limitations.
Alerts to electrical hazards, safety grounding, and proper plug usage.
Guidelines on water, cleaning, ventilation, heat sources, and cable protection.
Details safe handling of PowerCon® connectors and Class I device grounding.
Describes the UniAmp 1214 as a DSP-equipped power amplifier with specified inputs/outputs.
Lists compatible JBL powered loudspeakers and notes factory configuration differences.
Identifies and labels all connectors on the amplifier module panel.
Explains PowerCon® connectors, daisy-chaining limits, and AC wiring color codes.
Details the 3-pin XLR audio input/output, transformer-balance, and recommended wiring.
Details RS-485 network connectors, wiring, and PC interface requirements for control.
Explains how to recall DSP configurations via WinControl or the physical reset button.
Describes resetting the unit and recalling the preferential preset.
Details the bi-colour Status LED for power, faults, and unit identification.
Ensures proper operation by maintaining ventilation and avoiding heat sources.
Instructions for connecting the UniAmp 1214 to a PC via RS-485 interface adapters.
Overview of DSP tuning, preset management, and unit monitoring capabilities.
Details required cable parameters like impedance, capacitance, and resistance.
Directs users to the JBL website for detailed product specifications.
To Next Page
General
