JBL 6260 User Manual

BEFORE PROCEEDING
WITH
COMPLETE UNPACKING AND SETUP,
READ THE
SECTION
ON UNPACKING AND
INSPECTION
UBL
model 6230/6260
POWER
AMPLIFIER
JBL
Incorporated
8500 BALBOA BOULEVARD
P.O.
BOX 2200
NORTHRIDGE,
CA
91329,
U.S.A.
PHONE:
(818)
893-8411
TELEX: 4720424
SERVICE
ADDRESS:
8460 SAN FERNANDO ROAD
SUN
VALLEY, CA
91352,
U.S.A.
PHONE:
(818)
767-1000
Printed
In
U.S.A.
©
Copyright
1984,
JBL Inc

JBL 6260 Specifications

General

Brand	JBL
Model	6260
Category	Amplifier
Language	English

Summary

Introduction to JBL Power Amplifiers

Product Specifications

Details output power, frequency response, noise, and input characteristics.

Protection Circuitry

Explains the amplifier's protection modes and features.

Input and Output Connectors

Details types and wiring of input/output connectors.

Inspection and Installation Guide

Unpacking and Inspection Procedures

Guide to safely unpacking and inspecting the amplifier for transit damage.

AC Power Requirements and Safety

Details AC voltage, power cord, and electrical safety precautions.

Amplifier Mode Switch Operation

General Input Connections

Covers shielded cable, connector types (XLR, phone jack, barrier strip), and wiring.

Five-Way Binding Post Outputs

Output Polarity and Bridged Mono Connection

Avoiding Loudspeaker Overpowering

User responsibility to match amplifier power to speaker ratings; fuse recommendations.

Understanding Loudspeaker Power Ratings

Explains factors affecting loudspeaker failure and power handling.

Grounding Procedures and Safety

Details proper grounding for safety and noise reduction, including ground loops.

Operating Instructions

Turn On and System Check Procedure

Step-by-step guide for powering on the amplifier and checking operation.

Clip Indicator LEDs

Maintenance and Warranty

Repairs and Warranty Information

Details warranty terms, return procedures, and contact information.