JBL CINEMA BASE User Manual (English)

Other manuals for JBL CINEMA BASE

Quick Start Guide16 pages

Acus2 pages

Questions and Answers:

J
jennifer76Jul 27, 2025
What to do if there is no sound from JBL CINEMA BASE Home Theater System?
- C
  Chris HansonJul 27, 2025
  If you're not getting any sound from your JBL soundbase, here are a few things to check: * Ensure the soundbase is powered ON (the power indicator should be white). * Verify the cable connecting your TV to the soundbase is securely connected at both ends. * Confirm the soundbase’s Source Selector is set to the correct source, and that the source is actually playing audio. * Make sure the system isn't muted. If it is, press the volume buttons to un-mute it. * Check that the soundbase volume isn't turned all the way down, as the lowest setting can mute the system.
K
Kenneth WilliamsJul 31, 2025
How to fix a JBL CINEMA BASE Home Theater System that won't turn on?
- P
  pgilbertAug 1, 2025
  If your JBL soundbase isn't turning on, verify that the soundbase power supply’s AC cord is properly plugged into a working AC outlet and that the power supply is connected to the soundbase.
K
Kimberly FergusonAug 6, 2025
How to increase bass on JBL CINEMA BASE?
- H
  Heather VasquezAug 6, 2025
  If you find the bass output lacking, simply use the remote control to turn up the soundbase’s bass volume.
C
Chelsea WeaverAug 11, 2025
What to do if JBL CINEMA BASE sound is distorted?
- E
  Elizabeth MccormickAug 11, 2025
  If the sound from your JBL soundbase is distorted, check the source component to determine if the distortion originates from the source itself, rather than the soundbase.
X
xduncanAug 15, 2025
Why does my JBL CINEMA BASE turn on when I switch off my TV?
- D
  Dr. Michael ScottAug 15, 2025
  Some televisions have an incorrect Hot Plug Detection (HPD) protocol. You can try to activate/deactivate the HPD protocol by pressing the Surround and Volume buttons simultaneously.
S
Sandra CooperAug 20, 2025
Why does JBL CINEMA BASE reset volume when turned on?
- J
  jonesmatthewAug 20, 2025
  This volume reset is a built-in feature. If the soundbase was playing at more than 50 percent of its maximum volume before being turned off, it will automatically reset to 50 percent of the maximum volume when turned back on.