Need help?Do you have a question about the JBL Control 23 and is the answer not in the manual?
General| Impedance | 8 ohms |
|---|---|
| Color | Black or white |
| Power Capacity | 50 W Continuous Program Power; 25 W Continuous Pink Noise |
| Sensitivity | 86 dB SPL, 1W @ 1m |
| HF Driver | 19 mm (.75 in) titanium-laminate |
| Connectors | Spring terminals |
| Enclosure Material | High-impact polystyrene |
| Mounting | Wall |
| LF Driver | polypropylene coated paper |
Details the unique InvisiBall™ mounting system, emphasizing its unobtrusiveness and ease of installation.
Simple connection of amplifier outputs to speaker input jacks for basic setup.
Discusses how connecting multiple speakers affects impedance and how to calculate safe loads.
Explains various series/parallel wiring topologies to increase the number of loudspeakers driven by an amplifier.
Highlights the cancellation of low frequencies when speakers are wired with opposite polarity.
Addresses issues with no sound output, checking cables, amplifier signals, and volume.
Solves crackling or intermittent output by checking connections and cabling for proper contact.
Troubleshoots noise issues by checking for faulty electronics or poor system grounding.
Solves poor low-frequency output by correcting out-of-polarity speaker hookups.
To Next Page