Need help?Do you have a question about the JBL CRUISE and is the answer not in the manual?
Step 1: Remove the left M10 mirror from the motorcycle.
Steps 2 & 3: Attach speaker using M10 bolt, nuts, and washers.
Steps 4 & 6: Screw M8*90 bolt into speaker holder and adjust screw.
Caution about secure mounting to prevent falling due to vibration.
Step 1: Remove the left M10 mirror from the motorcycle.
Steps 2 & 3: Attach speaker using M10 bolt, nuts, and washers.
Steps 4 & 6: Screw M8*90 bolt into speaker holder and adjust screw.
Caution about secure mounting to prevent falling due to vibration.
General| Bluetooth | Yes |
|---|---|
| USB | No |
| AUX | No |
| Signal-to-Noise Ratio | 80 dB |
| Waterproof | IPX5 |
| Mounting | Handlebar |
| Impedance | 4 Ohm |
| Weight (per speaker) | 1.5 lbs |
| Included Components | 2 Speakers, Mounting Hardware, Wiring Harness |
| Type | Motorcycle Speaker System |
To Next Page