Need help?Do you have a question about the JBL DSC260 and is the answer not in the manual?
General| Input Channels | 2 |
|---|---|
| Output Channels | 6 |
| Sampling Rate | 48kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| Frequency Response | 20Hz-20kHz |
| Maximum Input Level | +20dBu |
| Maximum Output Level | +20dBu |
| Dimensions (Rack Units) | 1U |
| Type | Controller |
| Analog Outputs | 6 |
| Frequency Response Tolerance | ±0.5 dB |
| Output Impedance | 100 Ω |
| Input Sensitivity | +4 dBu |
| Output Level | +4 dBu |
| Crossover Slopes | 12, 24, 48 dB/octave |
| EQ | Parametric |
| Display | LCD |
| Connectors | XLR |
| Control | RS-232 |
| Dimensions | 19" x 1.75" x 8.5" |
| Analog Inputs | 2 x XLR |
| Input Impedance | 10 kΩ |
| Weight | 2.4 kg (5.3 lbs) |
Explains hazard symbols like lightning flash and exclamation point for user safety.
Guides through unpacking, inspecting for damage, and mounting the DSC260 controller.
Details AC power requirements, proper grounding, and audio/controller connection best practices.
Explains Lock Out, OEM Lock, MIDI channel, Midi Dump, and program deletion.
Configuration of low-pass filter types (Butterworth, Linkwitz-Riley) and cutoff frequencies.
Configuration of high-pass filter types (Butterworth, Linkwitz-Riley) and cutoff frequencies.
Details OEM Lock, password setup, and program locking for advanced security and customization.
To Next Page
