DSC260 Preliminary Owners Manual Revision 0.9
25
12.0 Specifications
Inputs: 2 channels, Maximum level +20dBu, 10kW imp., Pin 2 +
Electronically Balanced
Outputs: 6 channels, Maximum level +10dBu, into 600 W imp., Pin 2 +
Electronically Balanced
Output Impedance: 47 W
Dynamic Range: >100 dB
Frequency Response: 20Hz - 20kHz <+/- 0.5dB
Total Harmonic Distortion: <0.05%, 20 Hz - 20 kHz, @+10dBu
Configuration: Stereo 2 way and 3 way, Mono 4, 5, 6 way, Any combination of 2 inputs to six outputs with
individual passbands.
Crossover Slopes: Butterworth 12, 18, 24 or 48dB/Octave and Linkwitz-Riley 12, 24 or 48dB/Octave.
Front Panel Controls: Softkeys for programming functions. Mute on each output and LED level meters with limit,
-3, -6 and -20dB below threshold. Input LED meters with signal present, -12, -6 and
-3dB and Clip.
Display: 2 x 16 Character Backlit LCD
Limiters: Mid Band Limiters with variable threshold of -10 to +10dBu
Power Requirements: 100 - 240 Volts 50/60 Hz +/- 10%
Sample Rate: 48 kHz
A/D Conversion:
Assignable Equalization: An array of up to 38 bands of EQ can be assigned to the inputs and outputs. Dependent
upon slopes of crossovers used. High and Low shelving at 6dB or 12dB/Octave or
fully parametric with a variable bandwidth of 0.05 to 3.0 octaves. Frequency range
from 15Hz to 16kHz. Amplitude of +/- 15dB in 0.5 dB steps.
Assignable Delay: Up to 635 ms of delay on each input to output path including Input A, Input B, Input A + B
Sum and Outputs 1-6.
Latency: 1.2 ms, any input to any output.
Delay Resolution: 21 ms steps
Memory: 60 User Programs stored in Flash Memory
Dimensions: 44.4mm x 483mm x 203mm HxWxD (1.75” x 19” x 8”)
Net Weight: 2.8 kg (6.2 lbs)
Shipping Weight: 4.5 kg (9.9 lbs)
Safety Agency Approvals: CE, ETL
To Next Page
Loading...
