Need help?Do you have a question about the JBL ES250P (120V) and is the answer not in the manual?
General| Amplifier Power (Peak) | 700 watts |
|---|---|
| Phase Switch | 0 / 180 degrees |
| Power Output | 400W |
| Frequency Response | 25Hz – 150Hz |
| Driver | 12-inch |
| Crossover Frequency | 50Hz – 150Hz |
| Weight | 43 lb (19.5kg) |
| Enclosure Type | Bass Reflex |
| Inputs | Line-Level (RCA) |
| Power Requirement | 120V, 60Hz |
Report transit damage immediately and retain shipping materials for future use.
Optimize audio performance by carefully considering subwoofer placement and room acoustics.
Detailed overview of the physical controls and connection ports located on the subwoofer's rear panel.
Connect to receivers with LFE output; set LFE/Normal switch to LFE for optimal integration.
Connect to receivers with standard subwoofer outputs; set LFE/Normal switch to Normal.
Instructions for powering the unit on, understanding standby behavior, and LED status indicators.
Guidance on setting the gain for a balanced bass response, avoiding overpowering the soundstage.
How to adjust the phase switch to ensure bass output aligns with main speakers for optimal impact.
Determine the crossover point to integrate subwoofer bass with main speakers based on their capabilities.
To Next Page
