Need help?Do you have a question about the JBL Northridge E-Series E150P and is the answer not in the manual?
Identifies critical components that must be replaced with exact matches for safety.
Guide for connecting speakers using analog receiver/processor speaker-level outputs.
Guide for connecting via line-level outputs with analog receivers/processors.
Guide for connecting via LFE output with digital receivers/processors.
Adjusts subwoofer volume relative to the rest of the system.
Determines the highest frequency the subwoofer reproduces.
Diagnoses no sound issues when using speaker-level inputs.
Diagnoses low or no bass output issues.
Diagnoses no sound issues when using line-level inputs.
Procedure for testing the subwoofer's audio response using a sweep generator.
Steps for testing the sweep function of the subwoofer.
Procedure for testing the driver's mechanical function.
Addresses a 'chirp' noise issue occurring during subwoofer power-up.
Guidance on replacing specific MOSFET transistors for repairs.
Includes resistance checks, LED status, DC operation, and switching frequency measurements.
Includes line level input sensitivity testing.
Procedure to test high-level input sensitivity.
Procedure to test the low-pass filter function.
Procedure to test the LFE (Low Frequency Effects) function.
Identifies critical components that must be replaced with exact matches for safety.
Guide for connecting speakers using analog receiver/processor speaker-level outputs.
Guide for connecting via line-level outputs with analog receivers/processors.
Guide for connecting via LFE output with digital receivers/processors.
Adjusts subwoofer volume relative to the rest of the system.
Determines the highest frequency the subwoofer reproduces.
Diagnoses no sound issues when using speaker-level inputs.
Diagnoses low or no bass output issues.
Diagnoses no sound issues when using line-level inputs.
Procedure for testing the subwoofer's audio response using a sweep generator.
Steps for testing the sweep function of the subwoofer.
Procedure for testing the driver's mechanical function.
Addresses a 'chirp' noise issue occurring during subwoofer power-up.
Guidance on replacing specific MOSFET transistors for repairs.
Includes resistance checks, LED status, DC operation, and switching frequency measurements.
Includes line level input sensitivity testing.
Procedure to test high-level input sensitivity.
Procedure to test the low-pass filter function.
Procedure to test the LFE (Low Frequency Effects) function.
General| Power Output | 150 Watts RMS |
|---|---|
| Frequency Response | 27Hz - 150Hz |
| Series | Northridge E-Series |
| Model | E150P |
| Enclosure Type | Bass-reflex |
| Crossover Frequency | 50Hz - 150Hz |
| Inputs | Line-level, LFE |
| Driver Size | 10" (250mm) |
To Next Page
