EasyManua.ls Logo

JBL Northridge E-Series E150P - Service Bulletin # JBL2005-01; Chirp Noise on Power-Up Modification

JBL Northridge E-Series E150P
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Bulletin
Service bulletin # JBL2005-01 December 2005 Warranty labor rate: MINOR repair
To: All JBL Service Centers
Model: E150P, E250P Subwoofers
Subject: “Chirp” Noise on Power-Up
In the event you receive an E150P or E250P with the complaint: “the subwoofer make a slight “chirp”
noise when it becomes active from the stand-by mode”, perform the following modification.
Synopsis: Change C65 PE capacitor from 470µf to 47µf.
1) Remove the amplifer from the enclosure.
2) Remove the cover.
3) Change C65 Electrolytic capacitor from 470µf,16V to 47µf,16V, JBL part# 034-470515-200. Observe
polarity.
4) Replace cover, replace amplifier in enclosure, test subwoofer.
15
E150P subwoofer

Other manuals for JBL Northridge E-Series E150P

Related product manuals