Hanging Array Components
Four distinct components are required to link HLA speakers into a hanging array:
1) ATM MEGS-JBLHLA-T truss module (available direct from ATM FlyWare).
2) 1/2-inch SPA Shackles rated for 4,000 pounds (1,800 kg), also available from ATM.
3) JBL HLA-LB Lifting Bar
4) JBL HLA-CB Connecting Bar
Chain from Hoist
Inverted Electric Chain Hoist
OR
Other appropriate suspension method
Chain or Wire Rope Bridle
HLA
Loudspeaker
Wire Rope, Spansets, Shackles, etc. connected
to appropriate connection point
ATM MEGS HOIST
(1 per MEGS JBLHLA-T, included)
(is not JBL Product)
ATM MEGS JBLHLA-T
(1 per Column of Speakers)
(is not JBL Product)
1/2" Crosby Shackles
(4 per MEGS JBLHLA-T)
(is not JBL Product)
JBL HLA-LB Lifting Bar
(2 needed per column of speakers)
JBL HLA-CB Connecting Bar
(2 needed per attached speaker)
20
To Next Page
Loading...
Need help?
General
