44
Appendix (C) Available JBL parts and accessories
Wheel Bars (Part # HLA-WHEEL) (one pair)
Lifting Bar (Part # HLA-LB) (one pair)
Connecting Bar (Part # HLA-CB) (one pair)
50-foot NL-8 speaker cable (JBL part number 3850N)
5-foot NL-8 speaker cable (JBL part number 3805N)
Spare Spaceframe Parts
HLA spare end-cap plugs (921-00004-00) 4 per speaker
HLA bumper extrusion along sides top and bottom (382-00046-00) 4 per speaker
Locking Pins (JBL part number 885-00020-00)
4895 caution label (955-00071-00)
4895 Grille Assembly (JBL part number 128-00183-11)
4897 Grille Assembly (JBL part number 128-000193-02)
4895 Skid Plate Top Panel (JBL part number 380-10000-02)
4897 Skide Plate, Top and Bottom, and 4895 Bottom Panel (JBL part number 380-20000-02)
Tilt Arm Plunger Pin (JBL part number 885-00013-00)
Waveguide (JBL part number 126-00090-00)
Spare Drivers
HF compression driver 2451SL - 16 ohms, (Part Number 125-40001-01)
Diaphragm: D16R2451SL
10-inch mid-range driver 2251J (DCD) - 16 ohms, (Part Number 124-31002-01)
Cone kit: C16R2251
14-inch low-range driver 2254J (DCD) - 16 ohms, (Part Number 124-37005-01)
Cone kit: C16R2254
18-inch sub driver (2) 2242HPL - 8 ohms, (Part Number 758-12-02)
Cone kit: C8R2242
For additional spares information, see the HLA Technical Manual.
Covers for HLA
Rugged, custom-fitted weather-resistant covers are recommended to keep your HLA units in like-new condition.
Inquire about pricing and ordering information from:
Art Tec
Attn.: Mr. Jack Klinger
330 Pusey Avenue, Unit #7
Collingdale, PA 19023 USA Phone (610) 461-5770 FAX (610) 461-5720 (International Customers dial +1)
To Next Page
Loading...
Need help?
General
