Need help?Do you have a question about the JBL MPS-1000 and is the answer not in the manual?
Audio Specifications| amplifier power | 250W RMS |
|---|---|
| frequency response | 40Hz – 100Hz |
| signal-to-noise ratio | 81.1dB |
| input sensitivity (line-level) | 100mV to 6V |
| input sensitivity (speaker-level) | 1V to 13V |
| crossover frequency | 50Hz to 100Hz |
| crossover slope | 12dB per octave |
| bass boost | 0dB to +7dB @ 50Hz |
Power| fuse | 30A |
|---|---|
| max. current draw | 14A |
| idle current draw | <1.03A |
Dimensions| mounting depth | 7-15/16" (202mm) |
|---|---|
| cutout diameter | 10-1/8" (258mm) |
| overall diameter | 13"/13-1/16" (331mm/332mm) |
General safety warnings for operating the boat while using the audio system.
Important notes on installation and recommendations for professional help.
Crucial warnings and practical tips for a safe and effective installation process.
Guidance on selecting the optimal and safe location for mounting the subwoofer.
Step-by-step instructions for physically mounting the MPS1000 unit.
Detailed instructions for connecting power, ground, and signal cables.
Explanation of the Power LED indicator's function and status.
How to adjust the subwoofer's volume relative to other speakers.
How to adjust high-frequency cutoff for optimal sound integration.
How to adjust bass response at 50Hz for desired low-frequency impact.
How to reverse the subwoofer's output phase for better bass integration.
Common issues, likely causes, and solutions for the MPS1000 subwoofer.
To Next Page
