JBL SDP-5 - Page 36

Basic Operation
SDP-5
2-21
DIGITAL STATUS
•Provides information about digital input sources for which a
sample rate is detected, but no audio is present in the input
signal.
Parameter Possible Settings
INPUT The selected input
MODE The activated listening mode
INPUT TYPE ---
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz
STATUS menu parameter descriptions begin on page 2-22.
2CH BYPASS STATUS
•Provides information about 2-channel analog input sources
when the MAIN ADV menu 2-CH ANLG BYP parameter is set
to ON.
Parameter Possible Settings
INPUT The selected input
MODE 2CH BYPASS
INPUT TYPE BYPASS
STATUS menu parameter descriptions begin on page 2-22.