Why is my JBL Spyro Subwoofer not turning on?
If your JBL Spyro Subwoofer isn't powering on and the green LED is off, check that the wall adapter is properly plugged into the subwoofer and a working outlet. Test the outlet with another device like a lamp to ensure it's providing power. To isolate the issue, connect the JBL Spyro to a known audio source and test the audio source with headphones.
What to do if there is no sound from my JBL Spyro Subwoofer?
If there's no sound coming from your JBL Spyro Subwoofer, first, make sure the power adapter is correctly plugged into both the subwoofer and a working power outlet. A green LED on the subwoofer should light up when it's powered. Also, the volume might be too low or muted. Use the volume “Up” (+) pad to increase the volume or unmute the system. Finally, check the volume level on your audio source device and increase it if it's too low.
What to do if the volume control on my JBL Spyro Subwoofer right satellite isn't working?
If the volume control isn't working on the right satellite of your JBL Spyro Subwoofer, ensure that the right satellite is correctly and firmly plugged into the subwoofer. Also, verify that the left and right satellites are connected to the correct connectors on the subwoofer.
How to adjust bass on JBL Spyro Stereo System?
If there is no bass coming from your JBL Spyro Stereo System, try adjusting the Sub Level knob located on the rear of the subwoofer to your desired bass level.
How to adjust the bass on my JBL Spyro Subwoofer?
If you're not getting any bass from your JBL Spyro Subwoofer, adjust the Sub Level knob located on the rear of the subwoofer to increase the bass level to your preference.
How to fix no sound on JBL Spyro Stereo System?
If there's no sound coming from your JBL Spyro Stereo System, first ensure the power supply is properly connected to a live power source and to the JBL Spyro unit itself. A green LED on the subwoofer should light up when it's powered on. Also, check the volume level; you may need to un-mute or increase it by touching the volume “Up” (+) pad. If the input source volume is low, increase the volume on the audio source device.
What to do if no volume control on right satellite of JBL Spyro Stereo System?
If you have no volume control on the right satellite of your JBL Spyro Stereo System, check that the right satellite is correctly plugged into the subwoofer. Press it firmly to ensure a secure connection. Also, verify that the left and right satellites are connected to the correct subwoofer connectors and are firmly pressed into place.
Why is my JBL Spyro Stereo System not turning on?
If the green LED is off and there's no power to your JBL Spyro Stereo System, start by checking the connection of the wall adapter to both the JBL Spyro and the power outlet. Ensure the wall adapter is plugged into JBL Spyro correctly. Test the outlet with a lamp or another device to confirm it's receiving power. Also, connect the JBL Spyro to a known audio source and test the audio source with headphones to isolate the issue.
General| Type | Portable speakers |
|---|---|
| Dimensions (WxDxH) | 90 x 90 x 90 mm |
| Power requirements | 230 VAC |
| Subwoofer dimensions (WxHxD) | 200 x 200 x 140 mm |
| Magnet type | Neodymium |
| Audio output channels | 2.1 channels |
| Impedance | 5000 Ω |
| Frequency range | 40 - 20000 Hz |
| RMS rated power | 0.4 W |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| Product color | White |
To Next Page
