To Next PageTo Next Page
Need help?Do you have a question about the JBL SB130 and is the answer not in the manual?
General| Power Output | 110W |
|---|---|
| Bluetooth Version | 4.2 |
| HDMI ARC | Yes |
| Dolby Digital | Yes |
| Subwoofer | Yes |
| Type | Soundbar with wireless subwoofer |
| Channels | 2.1 |
| Optical Input | Yes |
| USB | No |
| Wall Mountable | Yes |
| Remote Control | Yes |
| Frequency Response | 40Hz – 20kHz |
| Soundbar Dimensions (W x H x D) | 900 x 67 x 63 mm |
Device compliance with FCC Part 15 rules for RF energy transmission and operation.
Apparatus compliance with Canadian ICES-003 standards for digital devices.
Grounding guidelines for external antenna/cable systems to prevent voltage surges.
Instructions on battery replacement, safety, and environmentally sound disposal.
General precautions for servicing, component replacement, and leakage current checks.
Procedure to measure leakage current to ensure safety before returning appliance.
Guidelines for dry-packaging, moisture sensitivity, and avoiding re-use of BGA ICs.
Procedure for removing flat pack ICs using a hot-air desoldering machine.
Procedure for removing flat pack ICs using desoldering braid and soldering iron.
Steps for installing flat pack ICs, including alignment and soldering.
Steps to reset the soundbar to factory default settings.
Instructions for upgrading the soundbar firmware using a USB disk.
List of tools needed for disassembling the soundbar.
Step-by-step guide to remove the main board and power PCB.
Procedure and caution for disassembling the iron grill to avoid damage.
Steps to remove the soundbar speakers after loosening screws.
Procedure for removing subwoofer boards and speakers.
Detailed circuit diagram for the main board.
Layout diagram of the main printed circuit board assembly.
Circuit and layout diagrams for the key and LED boards.
Exploded view diagram of the soundbar with part numbers and labels.
Exploded view diagram of the subwoofer with part numbers and labels.
