Need help?Do you have a question about the JBL SRX900 Series and is the answer not in the manual?
General| Series | SRX900 |
|---|---|
| Type | Powered Speaker System |
| DSP | Yes |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Connectivity | Ethernet |
Covers safety instructions, hardware, structural attachment, rigging, inspection, and maintenance for safe operation.
Illustrates various accessories like array frames, plates, cases, covers, and mounting adapters.
Simulation software for designing and predicting acoustical performance of line array systems.
Companion mobile app for LAC-3 software to assist in deployment of SRX900 systems.
Configuration and control application for networked SRX900 Series systems.
Detailed description of the rear panel layout and features for SRX906LA and SRX910LA models.
Detailed description of the rear panel layout and features for SRX918S and SRX928S subwoofer models.
Details on AC voltage requirements and the Neutrik powerCON TRUE1 TOP connectors.
Explanation of power modes, current draw, and power LED status for system operation.
Explanation of the Signal and Limit LEDs on the rear panel for system drive feedback.
Diagrams illustrating audio wiring for small and large SRX900 system configurations.
Explanation of IP addresses, subnet masks, and DHCP/Static configuration methods.
Description of Ethernet ports and an overview of Daisy Chain, Star, and Hybrid network topologies.
Information on HControl IDs (HCID), their use in system setup, and addressing examples.
Describes Line Array modes (Fill, SA, Array) and Subwoofer presets (60/80 Hz, Orientation).
Illustrates preset mode usage for SRX906LA and SRX910LA line array elements.
Details on ASC and TDC filters for tailoring array tonal response and optimizing for air absorption.
Demonstrates a typical use case for applying ASC and TDC filters to a 12-box array.
Achieving directional coverage with cardioid configurations, ratios, and spacing for subwoofers.
Guidelines on minimum spacing between cardioid stacks and recommended subwoofer ratios.
Description of LCD screens, menus, and navigation controls.
Detailed configuration for DSP parameters including Mute, Gain, Delay, EQ, and Orientation.
Settings for Network Mode, IP Address, Subnet Mask, and Gateway via the LCD.
Configuration of HControl, Auto Standby, Display Brightness, and other system settings.
Display of device info, ambient temp, locate feature, and system reset options.
Procedure for reverting the device firmware to a previous version.
Instructions and tools required for installing the weather-resistant protective cover.
Acoustical, transducer, audio input, amplifier, DSP, and user interface specifications for SRX906LA.
Specifications for networking, AC power, current draw, physical dimensions, and ordering information.
Acoustical, transducer, audio input, amplifier, DSP, and user interface specifications for SRX910LA.
Specifications for networking, AC power, current draw, physical dimensions, and ordering information.
Acoustical, transducer, audio input, amplifier, DSP, and user interface specifications for SRX918S.
Specifications for networking, AC power, current draw, physical dimensions, and ordering information.
Acoustical, transducer, audio input, amplifier, DSP, and user interface specifications for SRX928S.
Specifications for networking, AC power, current draw, physical dimensions, and ordering information.
To Next Page
