Need help?Do you have a question about the JBL SR Series and is the answer not in the manual?
General| Series | SR Series |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| Input Impedance | 20kΩ balanced |
| THD | <0.05% @ full power |
| Protection | Thermal, short circuit, DC offset, overload |
| Power Output | Varies by model (e.g., SR4702: 700W per channel @ 4Ω) |
| Frequency Response | Varies by model (Typically 20 Hz - 20 kHz) |
To Next Page
