JBL VerTec VT4889 - VT4880 Line Array Amplifier Configurations (2 or 4 Box Arrays)

Page 18
IMPORTANT NOTES;
All wiring configurations shown above use 8-conductor speaker cables terminated with Neutrik NL4 "Speakons".
Ensure that each conductor in the cable is a minimum of #11 AWGuage (3-4 mm).
JBL VT4880:
The VT4880 has two 2258H drivers (8W) wired Independently =8W / 8W Pins 2± / 1±
JBL VerTec VT4880
Power Amplifier configurations - 2 or 4 Box Arrays