jcb 215 Service Manual

Folding Stand for
Holding Glass -
essential for preparing
new glass prior to
installation.
JCB part number -
892/00843
S186280
12V Mobile Oven - 1 cartridge capacity - required to
pre-heat adhesive prior to use. It is fitted with a male
plug (703/23201) which fits into a female socket
(715/04300).
JCB part number - 992/12300
Hand Cleaner - special blend for the removal of
polyurethane adhesives.
JCB part number - 4104/1310
(454g; 1 lb tub)
S186240
826/01099 M6 x 16mm Rivet Nut
826/01101 M6 x 19mm Rivet Nut
826/01103 M8 x 18mm Rivet Nut
826/01102 M8 x 21mm Rivet Nut
826/01104 M10 x 23mm Rivet Nut
826/01105 M10 x 26mm Rivet Nut
Installation Tool Available from:
Bollhoff Fastenings Ltd.
Midacre
The Willenhall Estate
Rose Hill
Willenhall
West Midlands, WV13 2JW
4 - 1
Section 1 General Information
9803/3280
Section 1
4 - 1
Issue 1
Service Tools (cont'd)
Section B - Body & Framework
Cartridge Gun - hand operated - essential for the
application of sealants, polyurethane materials etc.
JCB part number - 892/00845
S186270
S261210
S186250
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk

jcb 215 Specifications

General

Engine Power	74 hp
Rated Operating Capacity	2, 100 lbs
Lift Path	Vertical
Tipping Load	4, 200 lbs
Net Engine Power	74 hp
Width over Tires	1, 800 mm
Height to Top of Cab	2, 300 mm
Hinge Pin Height	2, 800 mm
Travel Speed	11 km/h
Travel Speed (High)	11 km/h