jcb 540-140 - Page 131

Section 3-2 - Routine Maintenance
Service Schedules - Machines with SD and SF Engines
Pre-start Cold Checks, Service Points and Fluid Levels
3-2-4 3-2-4
9803/3750-05 (3-20-00)
Axle Mount Security - Check

Axle(s) Oil Level - Check

Axle(s) Oil - Change

Hub Oil Level (Without Oil Immersed Brakes) - Check

Hub Oil (Without Oil Immersed Brakes)
(9)
- Change

Hub Oil (With Oil Immersed Brakes)
(9)
- Change

Axle Breather(s) - Check

Trunnion Bearings
(7)
- Check/Adjust

Steering Stops (if fitted) - Security

Front Hub Bearings - Check

Wheel Nut Security - Check

Tyre Pressures/Condition - Check

Wheel Alignment - Check

Transmission Strainer - Clean

Drive Shafts and Universal Joints
(10)
- Security and Grease

Axle Pivots and Linkages
(10)
- Grease

HYDRAULICS
Oil Level - Check

Oil
(7)
- Sample, Change

Oil Filter
(11)
- Change

Suction Strainer - Clean

Pilot Filter (if fitted) - Change

BRAKES
Brake System Fluid Level - Check

Brake System Fluid - Change

Brake Plate Condition - Check

ELECTRICS
Battery Electrolyte Level (if applicable) - Check

Wiring for Chafing/Routing - Check

Battery Terminals for Condition and
Tightness
- Check

BODYWORK AND CAB
Operation 10 50
100
(1)
500 1000 2000 6000
ProCarManuals.com