jcb 550-170 User Manual

Copyright © 2004 JCB SERVICE. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise, without prior permission from JCB SERVICE.
World Class
Customer Support
9803/3750-05
Publication No.
Issued by JCB Technical Publications, JCB Aftermarket Training, Woodseat, Rocester, Staffordshire, ST14 5BW, England. Tel +44 1889 591300 Fax +44 1889 591400
Service Manual
Side Engine Loadalls
Section 1 - General Information
Section 2 - Care and Safety
Section 3 - Routine Maintenance
Section B - Body and Framework
Section C - Electrics
Section E - Hydraulics
Section F - Transmission
Section G - Brakes
Section H - Steering
Section K - Engine
Section M - Electronic Data Systems
ProCarManuals.com
Open front screen

jcb 550-170 Specifications

General

Brand	jcb
Model	550-170
Category	Compact Loader
Language	English

Summary

Section 1 - General Information

Applications

Details machine models covered by manual and their applicability.

Use

Explains manual structure and how to use it effectively.

Machine Identification

Information on identifying machine models, serial numbers, and component plates.

Torque Settings

Provides torque specifications for various fasteners and hydraulic connections.

Service Tools

Lists and describes special tools required for maintenance and repair procedures.

Service Consumables

Details sealants, adhesives, and compounds used in maintenance.

Fuel

Information on fuel types, acceptable fuels, and their usage.

Stall Speed Combinations

Details stall speed tests for diagnosing engine, transmission, or hydraulic faults.

Section 2 - Care and Safety

Safety Check List

Checklist for safe operation and maintenance of machinery.

Parking the Machine and Making it Safe

Procedure for safely parking the machine and securing it before maintenance.

Section 3 - Routine Maintenance

Health and Safety

Guidelines for safe handling and disposal of lubricants and waste.

Pre-start Cold Checks, Service Points and Fluid Levels

Routine checks and fluid level inspections before operating the machine.

Pre-start Cold Checks, Service Points and Fluid Levels

Routine checks and fluid level inspections for SE engines.

Specifications

Details on capacities and specifications for fluids and lubricants.

Introduction

Guidelines for cleaning the machine using water, steam, or detergents.