Section 3-4 - Routine Maintenance
Fluids, Lubricants and Capacities
Specifications
3-4-3 3-4-3
9803/3750-05 (3-23-01)
Brake System
JCB Light Hydraulic Fluid
(5)
ISO VG15 4002/0500
Hydraulic Tank
(6)
JCB High Performance
Hydraulic Oil
- Above 100 °F, 38 °C ISO VG46 4002/0800
- Below 100 °F, 38 °C ISO VG32 4002/1000
535-125 HiViz, 535-140
Hiviz
127 (27.9)
540-140 131 (28.8)
540-170 180 (39)
Grease Points
JCB Special HP Grease
(8)
Lithium based, No. 2
consistency
(7)
4003/2000
JCB Special MPL-EP Grease
(8)
4003/1500
Wear Pad Runways JCB Waxoyl 4004/0500
Boom Hoses JCB Special Slide Lubricant 4003/1100
(1) !CAUTION: Do not use ordinary engine oil.
(2) Superior grade oils may be more appropriate for heavy duty applications (such as sustained high loads and
operation at elevated temperatures).
(3) Friction modified oils must not be used (e.g. Dexron ATF type).
(4) Must be suitable for use with oil immersed brakes and limited slip differentials (LSD).
(5) !CAUTION: Do not use ordinary brake fluid.
(6) This is nominal tank capacity. The total hydraulic system capacity depends on the equipment being used. Fill with
all cylinders closed. Watch level sight glass when filling.
(7) Includes extreme performance additives.
(8) JCB HP Grease is the recommended specification grease. If JCB MPL Grease is used, all 50 hour greasing
operations must be carried out at ten (10) hour intervals; all 500 hour greasing operations must be carried out at 50
hour intervals.
ITEM
CAPACITY
Litres (Gal) FLUID/LUBRICANT
SPECIFICATION
INTERNATIONAL JCB
ProCarManuals.com
To Next Page
Loading...
