Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-7 1-3-7
9803/3750-05 (1-02-01)
ROPS/FOPS and OECD Certification Plates
445911-5
Fig 7.
Machines built to ROPS/FOPS standards have an
identification label A fitted to the inside of the cab.
Machines built to ROPS/FOPS and OECD standards have
identification label B fitted to the inside of the cab.
Definition of terms:
ROPS Roll Over Protection Structure
FOPS Falling Objects Protection Structure
OECD Organisation for Economic Co-operation and
Development.
ProCarManuals.com
To Next Page
Loading...
