Section 2 - Care and Safety
Safety Notices
Safety Labels
2-14 2-14
9803/9360-4
ISO-07B
817-70018-2
Part Number: 817/70018
Description: Crush hazard. Do not
operate the controls from outside of
the machine.
ISO-07D
817-70112-2
Part Number: 817/70112
Description: Crush hazard. Keep a
safe distance from the moving parts.
ISO-09A
332-P4581-1
Part Number: 332/P4581
Description: Severing of hands or
fingers. Keep clear of/do not reach
into the moving parts. Stop the engine
and remove the starter key before you
start maintenance work. Refer to
Making the Machine Safe (Routine
Maintenance Section).
ISO-09C
817-70102-3
Part Number: 817/70102
Description: Crushing of fingers or
hands. Remove the starter key and
refer to the Service Manual before you
start maintenance work.
ISO-010A
817-70029-3
Part Number: 817/70029
Description: Crush hazard. Wear the
seatbelt when you operate the
machine.
ISO-12A
817-70106-2
Part Number: 817/70106
Description: Strike to whole body
(machine swing). Keep a safe
distance from the machine.
ISO-11D
817-70100-2
Part Number: 817/70100
Description: Fall. Enter and dismount
safely. Refer to Entering and
Leaving the Cab (Operation
Section).
ISO-11E
817-70006-2
Part Number: 817/70006
Description: Fall. Unexpected
machine movement because of
accidental contact with the machine
controls if the hydraulic functions are
not isolated..
To Next Page
Loading...
