jcb JCB-PW15040P - Stopping the Pressure Washer

JCB-PW15040P
Instruction & User Manual
21
Operation
Stopping
To stop the engine in an emergency, simply turn the
ignition switch to the OFF position. Under normal conditions,
use the following procedure.
> Move the throttle lever to the SLOW position.
> Turn the ignition switch to the OFF position.
> Turn the fuel valve lever to the OFF position.
After use, turn off the water supply.
WARNING – PULL HANDLE BEFORE ANY DISASSEMBLY – PRESSURE CAN STILL BE
PRESENT WITHIN THE LANCE
Slow
Off
Off
Throttle Lever
Fuel Lever
Ignition Switch