jcb JS160 - Service Tools; Section B - Body and Framework

3 - 1
Section 1 General Information
9803/6410
Section 1
3 - 1
Issue 1
Service Tools
(SECTION B) BODY AND FRAMEWORK
S186240
Hand Cleaner - special blend for the removal of
polyurethane adhesives.
4104/1310 (454g; 1lb tub)
S186250
12V Mobile Oven - 1 cartridge capacity - required to
pre-heat adhesive prior to use. It is fitted with a male
plug (703/23201) which fits into a female socket
(715/04300).
992/12300
S186260
240V Static Oven - available with 2 or 6 cartridge
capacity - required to pre-heat adhesive prior to use.
No plug supplied. Note: 110V models available upon
request - contact JCB Technical Service
992/12400 - 2 cartridge x 240V
992/12600 - 6 cartridge x 240V
S186270
Cartridge Gun - hand operated - essential for the
application of sealants, polyurethane materials etc.
892/00845
'
S186280
Folding Stand for Holding Glass - essential for
preparing new glass prior to installation.
892/00843
S186300
Glass Lifter - minimum 2 off - essential for glass
installation, 2 required to handle large panes of glass.
Ensure suction cups are protected from damage
during storage.
892/00842