About the Product
Product and Component Identification
9 9831/1450-1 9
A Identification plate
Engine
The engine data labels are attached as shown. Refer to Figure 6.
Figure 6.
A Serial number plate B Emission certification label
Engine identification number is shown on the serial number plate which is mounted above the fuel injection
pump.
Table 3. Example of the engine identification number
G P XXXXX U 0 00001 T
Digit 1 2 3-7 8 9 10-14 15
Table 4.
Digit Explanation
1 Engine family
2 Type of engine
3-7 The list number of the engine
8 Country of manufacture
9 The first digit is a production code
10-14 Engine serial number
15 Year of manufacture
Operator Protective Structure
WARNING Machines with a ROPS, FOPS,FOGS or TOPS are equipped with a seat belt. The ROPS,
FOPS,FOGS or TOPS is designed to give you protection in an accident. If you do not wear the seat belt you
could be thrown off the machine and crushed. You must wear a seat belt when using the machine. Fasten
the seat belt before starting the engine.
WARNING Modified and wrongly repaired ROPS, TOPS and FOGS are dangerous. Do not modify the
TOPS. Do not attempt to repair the ROPS, TOPS and FOGS. If the ROPS, TOPS and FOGS has been in
an accident, do not use the machine until the structure has been examined and repaired. This must be done
by a qualified person. For assistance, contact your JCB dealer. Failure to take precautions could result in
death or injury to the operator.
To Next Page
Loading...
Need help?
General
