About the Product
Safety Labels
14 9831/1450-1 14
Item Part No. Description Qty.
E 817/70116 Fall. Unexpected machine movement due to accidental contact with the
controls when the hydraulics are not isolated.
1
F 817/18541 Read the operator's manual before you operate the machine. 1
G 817/19470 The arm or bucket may move, keep clear. 1
H 817/70027 Crushing of whole body. Keep a safe distance. 1
J 332/J9693 (Combination label) The bucket can foul the boom when dipper is swinging
inwards. Maintain the clearance between the bucket and boom. Danger
of collision, maintain the clearance between the bucket and cab. Risk of
tripping, raise the control lock lever before you exit the machine. Risk of
injury by crushing, do not lean out of the window. Risk of electrocution,
maintain the minimum clearance recommended by your local electricity
supplier.
1
K 817/70144 Warning. Do not use as a lifting, tie down or retrieval point. 1
L 817/70027 Crushing of whole body. Keep a safe distance. 1
M 817/19470 The arm or bucket may move, keep clear. 1
N 333/J2439 Strike to the whole body (machine swing). Keep a safe distance from the
machine.
1
P 332/P7128 Burns to fingers and hands. Stay a safe distance away. 1
Q 817/18532 Pressure hazard. Stop the engine, remove the ignition key and release
the hydraulic pressure before you start maintenance work. Refer to
Maintenance Section in the operator's manual.
1
To Next Page
Loading...
