Need help?Do you have a question about the jcb MS-254SB and is the answer not in the manual?
Covers safe work areas, electrical precautions, and personal safety practices.
Details on preventing unintentional starting, posture, dress code, and tool maintenance.
Guidelines for workpiece support, cutting direction, hand placement, and blade clearance.
Rules for table cleanliness, single workpiece cuts, mounting, planning, support, jamming, and finishing cuts.
Proper use, speed, rotation, condition of insertion tools, and cleaning.
Guidelines on reducer rings, handling, protective devices, and blade suitability.
Identification of primary parts of the mitre saw using Figure I and numbered labels.
Identification of additional parts of the mitre saw using Figure II and numbered labels.
Detailed technical specifications including motor, blade, dimensions, weight, and laser class.
Presents A-weighted sound pressure and level values, and advises on hearing protection.
Defines the saw's purpose, limitations, and general operating hazards.
Steps for securing the machine and performing checks before starting.
Guidance on adjusting turntable, attaching parts, and basic sawing actions.
Detailed steps for setting up and performing 90° and angled crosscuts.
Procedures for setting up and performing 45° mitre and double mitre cuts.
Instructions on how to adjust and set the cutting depth limiter.
Procedures for attaching the sawdust bag and safely changing the saw blade.
Covers cleaning, oiling, brush inspection, and electrical connection requirements.
Instructions for safely moving and storing the mitre saw and its accessories.
Advice on recycling packaging and disposing of the old device responsibly.
Details on warranty registration, conditions for repair/replacement, and proof of purchase.
Outlines exclusions from warranty coverage and limits of liability.
States product compliance with EU directives and lists technical file authorization.
To Next Page
General
