Need help?Do you have a question about the jcb JCB-SCMS210 and is the answer not in the manual?
Describes requirements for a safe working environment, including lighting and hazard avoidance.
Outlines precautions to prevent electric shock, such as proper grounding and avoiding wet conditions.
Emphasizes alertness, common sense, and avoiding distractions or impairment during operation.
Instructions on selecting the right tool, proper usage, and safe storage to prevent accidents.
Advises reading the manual, understanding limitations, and recognizing specific tool-related risks.
Mandates the use of safety glasses, dust masks, and hearing protection during operation.
Instructions for inspecting power cords, using appropriate blades, and connecting dust extraction.
Covers safe operating conditions, extension cord use, and the necessity of operator training.
Key practices like avoiding overreaching, freehand cutting, and securing the workpiece.
Highlights severe risks from thrown material, missing parts, and hazardous dust exposure.
Explains potential risks of laser beams, including flash blindness from staring.
Provides essential rules for safe laser use, focusing on aiming and eye protection.
Guidance on safe stance, hand placement, and workpiece security to prevent injury.
Step-by-step guide for performing slide cuts to cut wider pieces.
Critical caution against pulling the head towards the user during sliding cuts to prevent kickback.
How to set the rotary table to various mitre angles using lock handles and positive stops.
Guide for setting the cutting head to bevel angles up to 45 degrees.
Combining mitre and bevel cuts, ensuring all adjustment screws are tightened.
Utilizing the specific 33.9° bevel stop for accurate crown moulding cuts.
A table detailing mitre and bevel settings for various crown moulding corner types.
Steps to ensure the cutting head is at a precise 0° bevel stop.
Calibrating the 45° bevel stop for accurate angle cuts.
Detailed steps for checking and adjusting the 33.9° bevel stop for crown moulding.
Emphasizes using correct blades, disconnecting power, and wearing protective gloves.
Step-by-step guide for safely removing the old blade and installing a new one.
To Next Page
General
