WORKING INSTRUCTIONS
CAUTION: The Mitre Saw should be
inspected (particularly for the correct
functioning of the safety guards)
before each use. Do not connect the
saw to the power supply until a safety
inspection has been carried out.
Ensure that the operator is
adequately trained in the use,
adjustment and maintenance of the
machine, before connecting to the
power supply and operating the saw.
WARNING: To reduce the
risk of injury, always unplug
the saw before changing or adjusting
any of the machines parts. Compare
the direction of the rotation arrow on
the guard to the direction arrow on
the blade. The blade teeth should
always point downward at the front of
the saw. Check the tightness of the
arbor screw.
To Next Page
Loading...
