jcb JCB-SCMS210 - Operation: Stop Plate and Extension Arm; Precise Stop Plate Positioning

8. PRECISE POSITIONING OF
THE STOP PLATE
Deploy the stop plate to the inboard
or outboard position as outlined
above.
1) Push the release button on the
front of the machine base below the
stop plate.
2) Slide the Extension Arm from the
machine base, and release the button
when at the approximate required
distance. (See )
NOTE: The extension arm has a
micro adjustment facility for nal
positioning.
1) Turn the adjustment knob
clockwise or counter clockwise as
required for nal exact positioning of
the stop plate.
9. THE EXTENSION ARM
(See )
With the stop plate in its stored
position the extension arm can be
used to support long workpieces.
To deploy the Extension Arm:
1) Push the release button on the
front of the machine base below the
stop plate.
2) Slide the Extension Arm from the
machine base, and release the button
when at the required distance.
10
11