To Next Page

To Previous Page

RELEASING THE CUTTING HEAD

The Cutting Head will automatically

rise to the upper position once it

is released from the locked down

position.

It will automatically lock in the upper

position.

To Release the Cutting Head from the

Locked Down position:

1) Gently press down on the Cutting

Handle.

2) Pull out the Cutting Head latching

pin (See ) and allow the Cutting

Head to rise to its upper position.

If Release is Difcult:

1) Gently rock the Cutting Head up

and down.

2) At the same time twist the Head

Latching Pin clockwise and pull

outwards.

NOTE: We recommend that when

the machine is not in use the Cutting

Head is locked in its down position

with the latching pin fully engaged in

its socket.

Questions and Answers:

Need help?

Do you have a question about the jcb JCB-SCMS210 and is the answer not in the manual?

jcb JCB-SCMS210 Specifications

General