7 - 4
Electrics (cont'd)
Changing the Light Bulbs (cont'd)
Switches and Warning Lights
1 With a fine screwdriver ease the Switch/Warning Lights
A from their sockets in the control panel.
2 The bulb holders B can then be pulled from the back of
the Switch/Warning Lights and the bulbs will come with
them.
3 The bulbs C are a straight pull from the holder.
4 Fit the new bulbs.
5 Re-assemble the Switch/Warning Light in the reverse
order.
Section 3
Routine Maintenance
9803/8500
Section 3
7 - 4
Issue 1
174290
AA
BB
CC
To Next Page
Loading...
