jcb ROBOT 165 - Attachments

Contents Page No.
Quick Release Couplings 1 - 1
Connecting/Disconnecting Hoses 2 - 1
Shovels 3 - 1
General Purpose and Light Duty Shovels 3 - 1
6-in-1 Shovels 3 - 1
Pallet Forks 4 - 1
Manure/Silage Fork with Top Grab 5 - 1
Attachment Frame 6 - 1
Backhoe Attachment
Technical Data 7 - 1
Routine Maintenance 7 - 1
Circuit Description 7 - 2
Valve Block Removal & Replacement 7 - 3
Valve Block Dismantling & Assembly 7 - 4
Pressure Testing 7 - 6
Carriage Clamp Mechanism 7 - 7
Stabilisers 7 - 8
Dipper & Boom Removal & Replacement 7 - 9
Ram Removal & Replacement 7 - 11
Ram Dismantling & Assembly 7 - 13
Section A
Optional Attachments
9803/8500
Section A
Issue 3*
GENERAL INFORMATION
When fitting hydraulically operated optional attachments to the Robot the following
points should be noted:
When a Hammer or Earth Drill attachment is required a drain line must be fitted to
the machine. These two attachments can only be used on machines with High-
Flow circuit fitted.
Extra auxiliary relief valves can be fitted to the valve block and set to the required
pressure to provide protection for certain attachments where necessary. The
Standard Sweeper must have an auxiliary relief fitted but the Sweeper/Collector
already has a cross line relief fitted on the unit. The Manure/Silage Fork with Grab
does not require auxiliary relief valves.
Care must be taken if using attachments from other machines as the hydraulic
fluids may not be compatible.
*