Introduction
Machine Description
4 4
9821-0650-3
Machine Description
The JCB Wheeled Loader
P4-1002
Self-propelled wheeled machine with an integral front
mounted shovel-supporting structure and linkage, which
loads or excavates through forward motion of the machine,
and lifts, transports and discharges material.
Intended Use
The machine is intended to be used under normal
conditions for the applications described in this manual. If
the machine is used for other purposes or in dangerous
environments, for example in a flammable atmosphere or
in areas with dust containing asbestos, special safety
regulations must be followed and the machine must be
equipped for use in these environments.
Component Location
Note: The illustration(s) show a typical machine model;
your machine may look different from the model shown.
1 Engine oil level dipstick
2 Battery
3 Boom
4 Shovel
5 Articulation locks (x2)
6 ROPS/FOPS cab
7 Hydraulic tank filler point
8 Fuel tank filler point
C051130-1
Fig 2.
C051129-1
Fig 3.
To Next Page
Loading...
Need help?
General
