jcb 6T-1 Front Tip User Manual

SERVICE MANUAL
DUMPER
6T-1 Front Tip, 6T-1 Swivel Tip,
7T-1 Front Tip Hi-Viz, 9T-1 Front Tip
EN - 9813/8950 - ISSUE 2 - 03/2018
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2018 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
www.jcb.com
Foreword
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
explain it.
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
Contents
01 - Machine
06 - Body and Framework
09 - Operator Station
12 - Heating, Ventilating and Air-
Conditioning (HVAC)
15 - Engine
18 - Fuel and Exhaust System
21 - Cooling System
24 - Brake System
25 - Steering System
27 - Driveline
30 - Hydraulic System
33 - Electrical System
72 - Fasteners and Fixings
75 - Consumable Products
78 - After Sales

jcb 6T-1 Front Tip Specifications

General

Brand	jcb
Model	6T-1 Front Tip
Category	Compact Loader
Language	English

Summary

Foreword

The Operator's Manual

Discusses the importance and handling of the Operator's Manual.

01 - Machine

Acronyms Glossary

Defines common acronyms used in the manual.

03 - Safety

Details safety procedures and warnings related to the machine.

06 - About this Manual

Explains the manual's structure and how to use its sections and references.

09 - Description

Introduces machine description sections, including component locations and service points.

33 - Cleaning

Provides general instructions and precautions for cleaning the machine.

06 - Body and Framework

Acronyms Glossary

Defines acronyms related to body and framework components.

00 - Body and Framework

General overview of the machine's body and framework structure.

03 - Chassis

Details the chassis structure of the machine.

36 - Upper Crossmember

Instructions for removing and installing the upper crossmember.