jcb TM320S User Manual

Introduction
Machine Description
4 4
9821-3100-6
Machine Description
The JCB Wheeled Loader
P4-1002
Self-propelled wheeled machine with an integral front
mounted shovel-supporting structure and linkage, which
loads or excavates through forward motion of the machine,
and lifts, transports and discharges material.
Intended Use
The machine is intended to be used under normal
conditions for the applications described in this manual. If
the machine is used for other purposes or in dangerous
environments, for example in a flammable atmosphere or
in areas with dust containing asbestos, special safety
regulations must be followed and the machine must be
equipped for use in these environments.
Component Location
Note: The illustration(s) show a typical machine model;
your machine may look different from the model shown.
1 ROPS/FOPS cab
2 Transmission filter
3 Articulation lock
4 Shovel
5 Boom
6 Coolant reservoir
7 Transmission oil level dipstick
8 Fuel water seperator filter
9 Fuel filter
10 Engine fuse box
11 Engine oil filler point
12 Fuel tank filler point
13 Washer bottle
14 Engine oil filter
15 Crankcase ventilation filter
16 Engine oil level dipstick
17 Tool holder
18 Air conditioning accumulator
19 Condenser
20 Rear auxiliary hydraulic connectors
21 Recovery hitch
22 Trailer electric socket
23 Battery isolation switch
24 Reverse alarm
25 Air filter
26 Cooling pack
27 TMAF sensor
28 Air filter blockage sensor
29 Primary fuse box
30 Battery
31 Hydraulic tank filler point
32 Hydraulic oil level sight glass
33 Hydraulic filter
34 Alternator

jcb TM320S Specifications

General

Brand	jcb
Model	TM320S
Category	Front End Loaders
Language	English