Bill Return Codes
Use with Stand-Alone Test w/Rejections, or Host Simulator
# of
Blinks
Description Possible Cause
1
2
3
4
5
7
8
9
10
12
13
14
15
Crooked insertion
Magnetic pattern error
Acceptor detected a
bill while in stand-by
Dark/Light ratio of bill
is below fixed Value
Transport feed error
Photo pattern error
Photo level error
Return by inhibit
settings
Returned by host
Detected another bill
while a bill was still in
stack mode
Bill length error
Color pattern error
Return by other
reasons
(Magnetic error)
• Bill was inserted crooked
• Entrance sensor malfunction
• Error detecting magnetic
pattern on a bill/note
• Detected the presence of a bill/
note while in stand-by
• Reflective sensors may not be
working properly
• Bill/note not detected by the
Transport feed sensor within a
specified period
• Bill/note may have a pattern
not programmed in memory
• Sensor may not be working
properly
• Dirty belts and/or rollers
• Double/overlapping bill
detected
• The bill/note may be dirty
• Bill/note does not fall into
range of acceptable bills/notes,
or denomination direction
• Game program/settings will not
accept inserted bill/note
• Entrance sensor malfunction
• Object blocking entrance
sensor
• Length of bill/note not within
programmed specification
• Irregular color/shade/markings
• A combination error with
magnetic sensors
DBV
TM
200 Units
To Next Page
Loading...
