- 46 -
Electric bilge pumps
- The bilge pumps are powered by DC.
- Location of the electric bilge pumps: Ref 3 & 3’.
- The switch for the electric bilge pump is located on the switch panel (Ref 4).
- The electric bilge pump must only be used to discharge stagnant water at the bottom of the
bilge. It must not be used to pump out any oil-based products (petrol, oil) or inflammable liquids.
Operation:
I- Turn on the battery switches.
II- Switch on the bilge pump (Ref 4).
If the boat is equipped with an automatic bilge pump, the switch has an always-on position.
Ref 3 (Well) Ref 3’ (Skipper's cabin)
To Next Page
Loading...
