Smart Wave Maker
MCP
、
MLW
、
MOW Series
IX. Maintance
1. Clean the controller regular to ensure good performance.
2. Clean the controller surface with dry cloth if there is any water
to prevent water inflow into controller.
3. Remove the waste in the pump by rotating the basket in anti
clockwise to open and lock in clockwise direction.
4. Use soft cloth to rub blade and clean the dirty in the pump.
5. This product is indoor use only, don’t submerged in the water to
cause unnecessary loss.
DISPOSAL：
Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary. This product must not be disposed
together with the domestic waste. This product has to be disposed
at an authorized place for recycling of electrical and electronic
appliances. By collecting and recycling waste, you help save
natural resources, and make sure the product is disposed in an
environmental friendly and healthy way.
To Next Page
Loading...
