Jebao MDP Series - Data Memory and Wi-Fi Icon Usage

Smart DC Pump
MDP Series
7
more than 17 seconds, the display screen become in a
slightly brightness, enters the screen protected mode. When
any key is pressed, the display screen returns back to normal
brightness. Meanwhile, long press the "▲ ▼" button to enter
the screen brightness modulation mode, the "▼" to adjust the
normal brightness;the "▲" button to adjust the screen saver
brightness.
4. Data memory function
When power off the controller, the controller keeping the
same default parameter in memory after reworking.
5. Wi-Fi icon description and usage
A.Wi-Fi icon flashes while the Pump is on smart configuration
mode.
B.Wi-Fi icon and AP icon flashing synchronous, when the
Pump is on AP configuration mode.
C.Wi-Fi icon is keeping displayed when the Pump is
connected to the cloud server.
D.Wi-Fi icon disappears when the Pump is disconnected to