Need help?Do you have a question about the Jedia JMA-300A and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz (±0.5dB) |
|---|---|
| Input Impedance | 47kΩ |
| Signal to Noise Ratio | ≥95dB (A-weighted) |
| Input Sensitivity | 300mV |
| Dimensions | 430mm x 140mm x 380mm |
| Weight | 15kg |
| Output Power | 300W + 300W (4Ω), 150W + 150W (8Ω) |
| Total Harmonic Distortion | <0.05% at 1kHz |
| Power Output | 300W + 300W (4Ω), 150W + 150W (8Ω) |
| THD | <0.05% at 1kHz |
| Damping Factor | >200 |
Explains the meaning of PROTECT, CLIP, SIGNAL, and POWER LEDs.
Controls the output level for channel A and B.
Provides power to the unit.
Connects the power cord and houses the AC fuse.
Input terminals for connecting to other amplifiers or sources.
Connects speakers to the amplifier output.
Selects between Stereo and Bridge Mono operation modes.
Details how to connect the amplifier for stereo operation.
Details how to connect the amplifier for bridged mono operation.
Details input sensitivity, output power across models and frequencies.
Lists power requirements for each amplifier model.
Covers frequency response, signal-to-noise ratio, dimensions, and weight.
To Next Page
