Need help?Do you have a question about the Jedia MOBILE 35 and is the answer not in the manual?
Controls power to the unit and lights up the indicator LED when ON.
Adjusts high and low filters to improve tone quality and reduce resonance.
Adjusts input signal levels from MIC, AUX, and tape inputs.
Indicates the output signal level of the amplifier.
Space for optional modules like tuners, cassette decks, or digital messages.
Balanced input jacks for microphones and auxiliary devices with specified sensitivities.
Selects priority for MIC1/2 by pushing the switch downward for activation.
Selects MIC LEVEL or AUX LEVEL for the MIC-3/AUX-1 input.
RCA pin jacks for inputting tape signals and outputting recording signals.
Terminals for telephone paging input and amplified telephone ring signals.
Controls ON/OFF for telephone bell sound and adjusts its input level.
Adjusts the input level for the paging broadcast signal.
Terminals for connecting speakers, supporting 4-16 ohm or high impedance.
Selects output impedance for high impedance terminals (70V or 100V).
Terminal for connecting a 12VDC battery input; polarity must be confirmed.
Socket for connecting the AC power cord, ensure main power is off.
Holder for the AC fuse; replace with the same type if blown.
Details on input sensitivity, output, THD, frequency response, S/N ratio, tone filter, and power consumption.
Information on power source options, physical dimensions, and weight of the units.
To Next Page
General
