KEYS
Your vehicle uses a keyless ignition system.
The ignition system consists of a key fob with
Remote Keyless Entry (RKE) and a START/
STOP push button ignition system. The Re-
mote Keyless Entry system consists of a key
fob and Keyless Enter-N-Go feature if
equipped.
NOTE:
The key fob may not be found if it is located
next to a mobile phone, laptop or other elec-
tronic device; these devices may block the
key fob’s wireless signal.
Key Fob With Remote Control
The key fob with Remote Control contains a
Remote Keyless Entry feature. The Remote
Keyless Entry system allows you to lock or
unlock the doors and liftgate or activate the
Panic Alarm from distances up to approxi-
mately 66 ft (20 m) using a handheld key
fob. The key fob does not need to be pointed
at the vehicle to activate the system.
Key Fobs
To Unlock The Doors And Liftgate
Push and release the unlock button on the
key fob once to unlock the driver's door or
twice within five seconds to unlock all doors
and the liftgate.
All doors can be programmed to unlock on the
first push of the unlock button. Refer to
“Uconnect Settings” in “Multimedia” in your
Owner’s Manual at
www.jeep.com/en/owners/manuals/ for fur-
ther information.
To Lock The Doors And Liftgate
Push and release the lock button on the key
fob to lock all doors and liftgate.
Vehicles Equipped With Keyless Enter-N-Go —
Passive Entry
If one or more doors are open, or the liftgate is
open, the doors will lock. The doors will
unlock again automatically if the key is left
inside the passenger compartment, otherwise
the doors will stay locked.
Keyless Ignition Key Fob
1 — Unlock
2 — Lock
3 — Remote Start
4 — Panic
5 — Emergency Key
13
To Next Page
Loading...
