EasyManua.ls Logo

Jeep 2017 RENEGADE - Removing and Installing Panels

Jeep 2017 RENEGADE
332 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To retract the front panel to the open position,
push the open/close button.
From the fully open position, pull the open/
close switch: the front panel will close com-
pletely.
Venting The Front Panel
To vent the front panel push and release the
vent switch.
During the vent operation any push on the
open/close switch will stop the closing of the
panel.
NOTE:
If the My Sky is in open position, the vent
switch must be held until the panel vents.
Auto-Reverse Feature
The front panel of the retractable roof is
equipped with a auto-reverse safety system
that is able to detect the presence of an
obstacle during the opening and closing mo-
tion of the panel.
When this event occurs, the front panel stops
and reverses immediately.
NOTE:
With both panels removed the retractable
roof cannot be opened or closed.
Removing And Installing Panels
NOTE:
Remove the panels only when the vehicle is
stationary.
The rear panel can be removed only when
the front panel is completely closed or
removed.
Removing Panels
1. Front panel must be in the closed position
to remove panels.
My Sky Key Location
55

Table of Contents

Other manuals for Jeep 2017 RENEGADE

Related product manuals