4. Install the wiper blade and firmly push the
wiper blade until it snaps into place.
Rear Wiper Blade Removal/Installation
1. Carefully lift the rear wiper arm upward to
raise the wiper blade off of the liftgate
glass.
2. Grab and hold the wiper arm closest to the
wiper blade end while pushing the wiper
blade towards the liftgate glass to unsnap
the blade pivot pin from the wiper blade
holder on the wiper arm.
3. Install the wiper blade pivot pin into the
wiper blade holder at the end of the wiper
arm, and firmly push the wiper blade until
it snaps into place.
RAISING THE VEHICLE
In the case where it is necessary to raise the
vehicle, go to your authorized dealer or ser-
vice station.
TIRES
Tire Safety Information
Tire safety information will cover aspects of
the following information: Tire Markings, Tire
Identification Numbers, Tire Terminology and
Definitions, Tire Pressures, and Tire Loading.
Tire Markings
1 — Wiper Blade
2 — Release Button
3 — Wiper Arm
Tire Markings
1 — U.S. DOT
Safety Stan-
dards Code
(TIN)
4 — Maximum
Load
2 — Size Desig-
nation
5 — Maximum
Pressure
3 — Service
Description
6 — Treadwear,
Traction and
Temperature
Grades
SERVICING AND MAINTENANCE
206
To Next Page
Loading...
