Installing Panel
NOTE:
Rear panel must be installed before the front
panel.
1. From outside the vehicle, place the panel
on the slides.
2. Gently slide the front panel forward, or the
rear panel backwards.
3. Align the colored guide tabs to ensure the
panel(s) close properly. Front panel is
labeled with yellow guide tabs. Rear panel
is labeled with blue guide tabs.
4. From inside the vehicle, pull the handle
down and toward the stowed position,
locking it into place.
Installing Rear Panel
Front Guide Tabs
Closing Panel Handle
GETTING TO KNOW YOUR VEHICLE
58
To Next Page
Loading...
