JEFF ROWLAND CONTINUUM S2 User Manual

(4) MUTE MODE: Pressing the MUTE button will mute the speaker and line outputs of the
CONTINUUM S2 and illuminate the red indicator light below the MUTE button. Pressing this
button again will turn off the light and restore the output of the integrated amplier to the
previous volume setting. To avoid spurious noises and possible damage to other system
components, the integrated amplier should be muted when connecting or disconnecting
any rear panel connections.
(5) VOLUME DISPLAY: This display shows the current volume of the selected input
numerically, from 00.0 to 99.5, in 0.5 dB increments. If desired, the volume display can be
congured to turn off 5 seconds after receiving any command from the front panel or the
Remote Transmitter. Please contact your dealer about this function. The volume display also
contains the infrared (IR) receiver for receiving remote commands.
(6) VOLUME CONTROL: Rotation of the volume control knob clockwise will increase the
output level of the CONTINUUM S2. Rotation of the knob counter-clockwise will decrease
the output level. The CONTINUUM S2 features a dual-range volume control system: rotating
the volume knob slowly will cause the volume to increase or decrease in small, precise
steps. Rotating the knob abruptly will result in large, immediate changes to the output
level.
NOTE: When the volume control is set to 85.5, the integrated amplier is set for unity (0 dB)
gain from any input to each RCA/XLR line output.
REVA1.9 - CONTINUUM S2 INTEGRATED AMPLIFIER

PAGE 13

JEFF ROWLAND CONTINUUM S2 Specifications

General

Brand	JEFF ROWLAND
Model	CONTINUUM S2
Category	Amplifier
Language	English